AGFA SNAPSCAN 600 User Manual download pdf (Page 6)

Preface 6

Environmental requirements

■ Place the scanner on a horizontal, flat surface.

■ To ensure proper ventilation, allow a minimum of 10 cm (4 inches) free space

around each side of the scanner.

■ Make sure that no vibrations or shocks occur.

■ Make sure that the area is free of dust.

■ Avoid any contact with water.

■ Your SnapScan is designed to perform at best when the environmental

temperature is between 10

C and 40

C. Avoid exposure to direct sunlight

and heating devices.

■ Your SnapScan is designed to perform at best when the environmental

humidity is between 20% and 85%. Avoid environments where humidity

fluctuations might occur.

■ Check whether the voltage of the power cord corresponds to the voltage in

your area. If it does not correspond, contact your dealer. Avoid environments

where voltage fluctuations might occur.

Precautions

For your own safety and that of your equipment, respect conscientiously the

environmental requirements and always take the following precautions:

Caution: For the reason of safety, besides the personal maintenance mentioned in this

Owner's Guide, don't try to remove any mechanical parts or any electronic devices. If

you need service, our dealer and service offices are available to help you.

■ Handle your SnapScan and its options with care: the glass plates are fragile.

There is no warranty on breaking the glass plates and your dealer is not liable

for consequential damages.

■ Check frequently whether there is no overheating of the power plug and

whether the power plug is pushed all the way into the socket.

■ Switch off the machine at the end of your working day or during power failure.

■ Disconnect the power plug when you want to clean the scanner housing or

the glass plate and when the scanner needs servicing or repairing.

■ Do not open the scanner housing as it contains high voltage areas and

sensitive components. Every repair should be carried out by your dealer.

■ Do not leave originals on the reflective glass plate for excessive periods of

time. The warmth of the scanner may cause them to deteriorate.

■ To avoid crashes, never use extension cables for SCSI cables.

■ For safety reasons, never use extension cables for power cords.

1 2 3 4 5 6 7 8 9 10 11 ... 71 72

No comments

AGFA SNAPSCAN 600 User Manual Page 6